Unit · BASE UNIT
G A10VSO 45 OV /31R-VRA12KB3R902462884
Base unit Bosch Rexroth series A10VSO, type code GA10VSO45OV/31R-VRA12KB3, material number R902462884. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft ISO 3019-1 Similar to shaft "S" however for higher torque (R). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: for flange ISO 3019-2 Diameter, 100, 2-hole 7/8 in 13T 16/32DP (KB3).
- Number
- R902462884
- Type code
- G A10VSO 45 OV /31R-VRA12KB3
- Group
- A10VSO 45
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902559903 | ROTARY GROUP Assembly parts list →L | 1 | |
| R910910852 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| 5 | R902546047 | PUMP HOUSING | 1 | |
| 6 | R902543246 | CONNECTION PLATE | 1 | |
| R910961024 | SWASH PLATE Assembly parts list →L | 1 | ||
| R902417400 | DRIVE SHAFT | 1 | ||
| 10 | R902436084 | SPLINED COUPLING | 1 | |
| R910938955 | ADJUSTMENT SHIM | 1 | ||
| R910704946 | TAPERED-ROLLER BEARING | 1 | ||
| R910704954 | TAPERED-ROLLER BEARING | 1 | ||
| R910900198 | BEARING SHELL | 2 | ||
| R910793671 | SHAFT SEALING RINGD | 1 | ||
| R910793698 | O-RINGD | 1 | ||
| 23 | R913052111 | R-RINGD | 4 | |
| R910640182 | O-RINGD | 1 | ||
| R902403814 | RETAINING RING | 1 | ||
| 27 | R910220264 | SOCKET HEAD CAP SCREW | 4 | |
| R909156654 | SCREW PLUGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 45 | 45 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft ISO 3019-1 Similar to shaft "S" however for higher torque | R |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | For flange ISO 3019-2 Diameter, 100, 2-hole 7/8 in 13T 16/32DP | KB3 |