Unit · AXIAL-PISTON PUMP
AL A10V O 60 DRG /52L-VUC62N00 -S5366R902466346
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO60DRG/52L-VUC62N00-S5366, material number R902466346. Nominal size: NG 60. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with pressure cut-off hydraulic remote controlled (DRG). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 UNC fastening thread UNC for through drive laterally opposite (62). Through drive: without through drive (N00). Special version no. 5366.
- Number
- R902466346
- Type code
- AL A10V O 60 DRG /52L-VUC62N00 -S5366
- Group
- A10VO 60
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902405036 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902455384 | CONTROL VALVE Assembly parts list →L | 1 | |
| 2 | R902400579 | FLANGE COVER | 1 | |
| 3 | R902400591 | FLANGE COVER | 1 | |
| 4 | R902513214 | ADAPTER Assembly parts list →L | 1 | |
| 4 | R902602014 | SEAL SCREW | 1 | |
| 5 | R902514896 | ADAPTER Assembly parts list →L | 1 | |
| 5 | R902603190 | SEAL SCREW | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 60 | 60 |
| Control device | with pressure cut-off hydraulic remote controlled | DRG |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 UNC fastening thread UNC for through drive laterally opposite | 62 |
| Through drive | Without through drive | N00 |