Unit · ZESPÓŁ PODSTAWY
GA10VNO28DR/53L-VRC11N00R902467799
Base unit Bosch Rexroth series A10VNO, type code GA10VNO28DR/53L-VRC11N00, material number R902467799. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: pressure controller hydraulic (DR). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "S" however for torque (R). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: according to ISO 6162 rear not for through drive (11). Through drive: without through drive (N00).
- Number
- R902467799
- Type code
- GA10VNO28DR/53L-VRC11N00
- Group
- A10VNO 28
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902453835 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R902473753 | SPRĘŻYNA DOCISKOWA | 1 | ||
| R910984014 | OGRANICZNIK KULOWY | 1 | ||
| R902468397 | OBUDOWA POMPY | 1 | ||
| R902502583 | PŁYTA POŁĄCZENIOWA | 1 | ||
| R902465144 | PŁYTA WYCHYLNA | 1 | ||
| R902467292 | WAŁ NAPĘDOWY | 1 | ||
| R902455142 | SPRĘŻYNA DOCISKOWA | 1 | ||
| R902400729 | PODKŁADKA REGULACYJNA (POZIOMUJĄCA) | 1 | ||
| R902545736 | PIERŚCIEŃ OGRANICZAJĄCY | 1 | ||
| R910704954 | ŁOŻYSKO WAŁECZKOWO-STOŻKOWE | 1 | ||
| R902651034 | ŁOŻYSKO WAŁECZKOWO-STOŻKOWE | 1 | ||
| R902454900 | OSŁONA ŁOŻYSKA | 1 | ||
| R902454899 | OSŁONA ŁOŻYSKA | 1 | ||
| R910993660 | WKRĘT Z ŁBEM STOŻKOWYM PŁASKIM | 2 | ||
| R910900853 | PIERŚCIEŃ USZCZELNIAJĄCY WAŁU | 1 | ||
| R913052042 | O-RING | 1 | ||
| R910940735 | R-PIERŚCIEŃ OKRĄGŁY | 1 | ||
| R902403815 | PIERŚCIEŃ ZABEZPIECZAJĄCY | 1 | ||
| R910806668 | ŚRUBA Z ŁBEM WALCOWYM | 4 | ||
| R909831317 | PODWÓJNY KOREK ZRYWANY | 2 | ||
| R910757519 | SZTYFT PROSTY | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Control device | Pressure controller hydraulic | DR |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "S" however for torque | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | according to ISO 6162 rear not for through drive | 11 |
| Through drive | Without through drive | N00 |