Unit · AXIAL-PISTON PUMP
AH A10V O100 ED72/31L-VSD12K15P -S2857R902478274
Axial piston pump Bosch Rexroth series A10VO, type code AHA10VO100ED72/31L-VSD12K15P-S2857, material number R902478274. Nominal size: NG 100. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: electric U = 24 V (ED72). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: 127-4 (C) 1 1/4 in 14T 12/24DP (K15). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 2857.
- Number
- R902478274
- Type code
- AH A10V O100 ED72/31L-VSD12K15P -S2857
- Group
- A10VO 100
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902478295 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902533433 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R900868651 | ASSEMBLY KIT | 1 | |
| 4 | R902533848 | CONTROL VALVE Assembly parts list →L | 1 | |
| 6 | R902434482 | SEAL | 1 | |
| 7 | R910478474 | SOCKET HEAD CAP SCREW | 4 | |
| 17 | R902650462 | EQUIPMENT SOCKET | 1 | |
| 60 | R909831568 | SAFETY CAP | 1 | |
| 61 | R902532435 | SAFETY CAP | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 100 | 100 |
| Control device | electric U = 24 V | ED72 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | 127-4 (C) 1 1/4 in 14T 12/24DP | K15 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |