Unit · AXIAL-PISTON PUMP
A A10V O 18LA6DG/53L-VPC11N00 -SO928R902479186
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO18LA6DG/53L-VPC11N00-SO928, material number R902479186. Nominal size: NG 18. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: power controller with pressure cut-off 36 to 70 bar (520 to 1015 psi) (LA6D). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft DIN 6885 not for through drive (P). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive (11). Through drive: without through drive (N00). Special version no. 928.
- Number
- R902479186
- Type code
- A A10V O 18LA6DG/53L-VPC11N00 -SO928
- Group
- A10VO 18
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902479198 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902451761 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902476980 | CONTROL VALVE Assembly parts list →L | 1 | |
| 30 | R910901969 | SCREW PLUG | 2 | |
| 40 | R902464777 | STOP SCREW | 1 | |
| 41 | R910913806 | NUT | 1 | |
| 42 | R910913805 | CAP NUT | 1 | |
| 43 | R910642827 | BONDED SEAL RING | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 18 | 18 |
| Control device | Power controller with pressure cut-off 36 to 70 bar (520 to 1015 psi) | LA6D |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft DIN 6885 not for through drive | P |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive | 11 |
| Through drive | Without through drive | N00 |