Unit · BASE UNIT
GA10VO180OV/32L-VSD11N00R902482476
Base unit Bosch Rexroth series A10VO, type code GA10VO180OV/32L-VSD11N00, material number R902482476. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft counter-clockwise (L). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D). Working port: according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) (11). Through drive: without through drive (N00).
- Number
- R902482476
- Type code
- GA10VO180OV/32L-VSD11N00
- Group
- A10VO 180
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902467553 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902449650 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R902446959 | PUMP HOUSING | 1 | |
| 6 | R902482484 | CONNECTION PLATE | 1 | |
| 7 | R902467219 | SWASH PLATE | 1 | |
| 8 | R902470347 | DRIVE SHAFT | 1 | |
| 12 | R902446965 | ADJUSTMENT SHIM | 1 | |
| 14 | R902446966 | STOP RING | 1 | |
| 15 | R910918203 | TAPERED-ROLLER BEARING | 1 | |
| 16 | R902650949 | TAPERED-ROLLER BEARING | 1 | |
| 17 | R902453958 | BEARING SHELL | 2 | |
| 18 | R910993660 | COUNTERSUNK-HEAD SCREW | 2 | |
| 20 | R909831178 | SHAFT SEALING RINGD | 1 | |
| 22 | R910930461 | O-RINGD | 1 | |
| 23 | R910366889 | O-RINGD | 4 | |
| 25 | R910941920 | RETAINING RING | 1 | |
| 27 | R910659169 | SOCKET HEAD CAP SCREW | 4 | |
| 31 | R909831319 | DOUBLE BREAK-OFF PLUG | 1 | |
| 33 | R910922017 | STRAIGHT PIN | 1 | |
| 43 | R910106879 | SLOTTED SPRING PIN | 1 | |
| 50 | R902459568 | SEGMENT | 2 | |
| 51 | R902493284 | SPACER SLEEVE | 4 | |
| 52 | R902530617 | SOCKET HEAD CAP SCREW | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 180 | 180 |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft counter-clockwise | L |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |
| Working port | according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) | 11 |
| Through drive | Without through drive | N00 |