Unit · AXIAL-PISTON PUMP
A A10V O45EK2ER/53L-VSC62N00P -S3128R902485829
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO45EK2ER/53L-VSC62N00P-S3128, material number R902485829. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 UNC fastening thread UNC for through drive laterally opposite (62). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 3128.
- Number
- R902485829
- Type code
- A A10V O45EK2ER/53L-VSC62N00P -S3128
- Group
- A10VO 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902478815 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902533211 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902438428 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902438539 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R902456342 | INTERMEDIATE PLATE | 1 | |
| 6 | R910110159 | SOCKET HEAD CAP SCREW | 4 | |
| 7 | R902434482 | SEAL | 1 | |
| 11 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 12 | R909157039 | SCREW PLUG | 1 | |
| 30 | R910967343 | SCREW PLUG | 2 | |
| 40 | R902445111 | STOP SCREW | 1 | |
| 43 | R910804886 | O-RING | 1 | |
| 50 | R910986163 | VALVE | 1 | |
| 51 | R910109312 | SOCKET HEAD CAP SCREW | 2 | |
| 52 | R902423611 | CARRIER | 1 | |
| 53 | R910109339 | SOCKET HEAD CAP SCREW | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 UNC fastening thread UNC for through drive laterally opposite | 62 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |