Unit · AXIAL-PISTON PUMP
A A10V O 63EK1DS/53R-VUC12N00PR902485872
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO63EK1DS/53R-VUC12N00P, material number R902485872. Nominal size: NG 63. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged (EK1DS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P).
- Number
- R902485872
- Type code
- A A10V O 63EK1DS/53R-VUC12N00P
- Group
- A10VO 63
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902436920 | BASE UNIT Assembly parts list →L | 1 | ||
| R902450439 | CONTROL VALVE Assembly parts list →L | 1 | ||
| R902438427 | CONTROL VALVE Assembly parts list →L | 1 | ||
| R902438532 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910967343 | SCREW PLUG | 2 | ||
| R902427032 | STOP SCREW | 1 | ||
| R910804886 | O-RING | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 63 | 63 |
| Control device | pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged | EK1DS |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |
Other versions 9
- R902518588 A A10V O 63EK1DS/53R-VUC12N00P -S3962
- R902492094 A A10V O 63EK1DS/53R-VUC12N00P -SO481
- R902485871 AL A10V O 63EK1DS/53R-VUC12N00P
- R902518587 AL A10V O 63EK1DS/53R-VUC12N00P -S3962
- R902492093 AL A10V O 63EK1DS/53R-VUC12N00P -SO481
- R902538495 AL A10V O 63EK1DS/53R-VUC12N00P -SO481
- R902540885 AL A10V O 63EK1DS/53R-VUC12N00P -SO833
- R902548000 AL A10V O 63EK1DS/53R-VUC12N00P -SO833
- R902551308 AL A10V O 63EK1DS/53R-VUC12N00P -SO833