Unit · AXIAL-PISTON PUMP
A A10VSO140 DFLR/31R-VSB12KB5 -SO200R902487771
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO140DFLR/31R-VSB12KB5-SO200, material number R902487771. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft standard shaft ISO 3019-1 (S). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: for flange ISO 3019-2 Diameter, 125, 2-hole 1 1/4 in 14T 12/24DP (KB5). Special version no. 200.
- Number
- R902487771
- Type code
- A A10VSO140 DFLR/31R-VSB12KB5 -SO200
- Group
- A10VSO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902487782 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R910924992 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R910924990 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R910984435 | ADAPTER Assembly parts list →L | 1 | |
| 6 | R910799998 | SOCKET HEAD CAP SCREW | 4 | |
| 7 | R902469012 | SEALING COVER Assembly parts list →L | 1 | |
| 10 | R910964730 | PIPING Assembly parts list →L | 1 | |
| 11 | R910921642 | POWER DIAGRAM | 1 | |
| 14 | R910764647 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft standard shaft ISO 3019-1 | S |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | For flange ISO 3019-2 Diameter, 125, 2-hole 1 1/4 in 14T 12/24DP | KB5 |