Unit · BASE UNIT
G A10VZO140 OV /10R-VSD12N00 LRR902490093
Base unit Bosch Rexroth series A10FZO, type code GA10VZO140OV/10R-VSD12N00LR, material number R902490093. Nominal size: NG 140. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Operating mode: pump, open circuit (O). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft standard shaft ISO 3019-1 (S). Mounting flange 003: based on ISO 3019-1 (SAE) 4-hole (D). Through drive 003: without through drive, only port plates 12 and 14 (N). Connector for solenoids 003: without, with hydraulic controllers (0).
- Number
- R902490093
- Type code
- G A10VZO140 OV /10R-VSD12N00 LR
- Group
- A10VZO 140
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902490034 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902538158 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902446468 | PUMP HOUSING | 1 | ||
| R902534419 | CONNECTION PLATE | 1 | ||
| R902446168 | SWASH PLATE | 1 | ||
| R902448540 | DRIVE SHAFT | 1 | ||
| R902425273 | ADJUSTMENT SHIM | 1 | ||
| R910988055 | STOP RING | 1 | ||
| R910918203 | TAPERED-ROLLER BEARING | 1 | ||
| R910918201 | TAPERED-ROLLER BEARING | 1 | ||
| R910918174 | BEARING SHELL | 2 | ||
| R909831178 | SHAFT SEALING RINGD | 1 | ||
| R910930461 | O-RINGD | 1 | ||
| R913053032 | R-RINGD | 4 | ||
| R910941920 | RETAINING RING | 1 | ||
| R910659169 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831319 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910922017 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable | A10V |
| Application area | Variable-speed drives | Z |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation 003 | Viewed on drive shaft clockwise | R |
| Sealing material 003 | FKM (fluorocarbon rubber) | V |
| Drive shaft 003 | Splined shaft standard shaft ISO 3019-1 | S |
| Mounting flange 003 | Based on ISO 3019-1 (SAE) 4-hole | D |
| Through drive 003 | Without through drive, only port plates 12 and 14 | N |
| Connector for solenoids 003 | Without, with hydraulic controllers | 0 |