Unit · AXIAL-PISTON PUMP
A A10V O180 LA9DS /32R-VSD11N00 -S3381R902491403
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO180LA9DS/32R-VSD11N00-S3381, material number R902491403. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D (LA9DS). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D). Working port: according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) (11). Through drive: without through drive (N00). Special version no. 3381.
- Number
- R902491403
- Type code
- A A10V O180 LA9DS /32R-VSD11N00 -S3381
- Group
- A10VO 180
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902492970 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902466302 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533222 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902492927 | ADAPTER Assembly parts list →L | 1 | |
| 10 | R902491404 | PIPING Assembly parts list →L | 1 | |
| 30 | R909156652 | SCREW PLUG | 1 | |
| 36 | R902469268 | WASHER | 1 | |
| 70 | R902421947 | SHIPPING PROTECTION | 1 | |
| 71 | R902421950 | SHIPPING PROTECTION | 1 | |
| 72 | R902602013 | SEAL SCREW | 1 | |
| 73 | R902602007 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 180 | 180 |
| Control devices | pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D | LA9DS |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |
| Working port | according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) | 11 |
| Through drive | Without through drive | N00 |