Unit · AXIAL-PISTON PUMP
A A10V O85LA9DS/53L-VUC11N00 -SO928R902496777
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO85LA9DS/53L-VUC11N00-SO928, material number R902496777. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D (LA9DS). Directions of rotation: viewed on drive shaft counter-clockwise (L). Seal: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) (11). Through drive: without through drive (N00). Special version no. 928.
- Number
- R902496777
- Type code
- A A10V O85LA9DS/53L-VUC11N00 -SO928
- Group
- A10VO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902465040 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902471431 | CONTROL VALVE Assembly parts list →L | 1 | |
| 30 | R910967351 | SCREW PLUG | 2 | |
| 40 | R902410509 | STOP SCREW | 1 | |
| 41 | R910903390 | NUT | 1 | |
| 42 | R910989878 | CAP NUT | 1 | |
| 43 | R910919314 | O-RING | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 85 | 85 |
| Control devices | pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D | LA9DS |
| Directions of rotation | Viewed on drive shaft counter-clockwise | L |
| Seal | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | according to ISO 6162 SAE flange ports at rear, metric fastening thread (not for through drive, "N00" only) | 11 |
| Through drive | Without through drive | N00 |