Unit · ZESPÓŁ PODSTAWY
GA4VSG180M/30R-PPB10KB3R902497214
Base unit Bosch Rexroth series A4VSG, type code GA4VSG180M/30R-PPB10KB3, material number R902497214. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure (A4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: based on ISO 3019-2 metric 4-hole (B). Working port: SAE flange ports A and B, located on same side, metric fastening thread (10). Through-drive: 100, 2-hole 7/8 in 13T 16/32DP (KB3).
- Number
- R902497214
- Type code
- GA4VSG180M/30R-PPB10KB3
- Group
- A4VSG 180
- Edition
- 07/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902403779 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R910995243 | OBUDOWA POMPY | 1 | ||
| R902418784 | PŁYTA POŁĄCZENIOWA Assembly parts list →L | 1 | ||
| R910993575 | URZĄDZENIE WSKAZUJĄCE Assembly parts list →L | 1 | ||
| R910798355 | ŚRUBA DWUSTRONNA Assembly parts list →L | 1 | ||
| R902489971 | SPRZĘGŁO WIELOWYPUSTOWE | 1 | ||
| R910513016 | ŚRUBA Z ŁBEM WALCOWYM | 4 | ||
| R910209228 | ŚRUBA Z ŁBEM WALCOWYM | 4 | ||
| R909153861 | KOREK GWINTOWANYD | 3 | ||
| R909151979 | KOREK GWINTOWANYD | 1 | ||
| R910928484 | O-RINGD | 1 | ||
| R910942134 | R-PIERŚCIEŃ OKRĄGŁYD | 1 | ||
| R909831318 | PODWÓJNY KOREK ZRYWANY | 2 | ||
| R910995345 | ŚRUBA PRZEPUSTNICY | 1 | ||
| R910922276 | DYSZA | 1 | ||
| R910979852 | TABLICZKA WZORCOWA | 1 | ||
| R910786365 | O-RING | 1 | ||
| R910109762 | ŚRUBA Z ŁBEM WALCOWYM | 2 | ||
| R902650190 | PODKŁADKA | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure | A4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 180 | 180 |
| Series | Series 3, index 0 | 30 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | Based on ISO 3019-2 metric 4-hole | B |
| Working port | SAE flange ports A and B, located on same side, metric fastening thread | 10 |
| Through-drive | 100, 2-hole 7/8 in 13T 16/32DP | KB3 |