Unit · BASE UNIT
GA10VNO85DR/53L-VRC11N00*SV*R902502438
Base unit Bosch Rexroth series A10VNO, type code GA10VNO85DR/53L-VRC11N00*SV*, material number R902502438. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: pressure controller hydraulic (DR). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "S" however for torque (R). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: according to ISO 6162 rear not for through drive (11). Through drive: without through drive (N00).
- Number
- R902502438
- Type code
- GA10VNO85DR/53L-VRC11N00*SV*
- Group
- A10VNO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 2 | R902416455 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902473753 | COMPRESSION SPRING | 1 | |
| 3 | R910984014 | BALL STOP | 1 | |
| 5 | R902448711 | PUMP HOUSING | 1 | |
| 6 | R910979582 | CONNECTION PLATE | 1 | |
| 7 | R902443756 | SWASH PLATE | 1 | |
| 8 | R902422693 | DRIVE SHAFT | 1 | |
| 10 | R902422349 | COMPRESSION SPRING | 1 | |
| 12 | R910966528 | ADJUSTMENT SHIM | 1 | |
| 14 | R910989235 | STOP RING | 1 | |
| 15 | R910720224 | TAPERED-ROLLER BEARING | 1 | |
| 16 | R910973501 | TAPERED-ROLLER BEARING | 1 | |
| 17 | R902424620 | BEARING SHELL | 1 | |
| 18 | R902424619 | BEARING SHELL | 1 | |
| 19 | R902419666 | COUNTERSUNK-HEAD SCREW | 2 | |
| 20 | R909831661 | SHAFT SEALING RING | 1 | |
| 21 | R913050498 | O-RING | 1 | |
| 22 | R910968739 | THROTTLE SCREW | 1 | |
| 24 | R910942133 | R-RING | 2 | |
| 25 | R910941918 | RETAINING RING | 1 | |
| 27 | R910604976 | SOCKET HEAD CAP SCREW | 4 | |
| 31 | R909831318 | DOUBLE BREAK-OFF PLUG | 4 | |
| 33 | R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 85 | 85 |
| Control device | Pressure controller hydraulic | DR |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "S" however for torque | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | according to ISO 6162 rear not for through drive | 11 |
| Through drive | Without through drive | N00 |