Unit · AXIAL-PISTON PUMP
AP A10V O 74 DFLR/31R-VUC59N00 -S3765R902504076
Axial piston pump Bosch Rexroth series A10VO, type code APA10VO74DFLR/31R-VUC59N00-S3765, material number R902504076. Nominal size: NG 74. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft Clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter; limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Through drive: without through drive (N00). Special version no. 3765.
- Number
- R902504076
- Type code
- AP A10V O 74 DFLR/31R-VUC59N00 -S3765
- Group
- A10VO 74
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902486164 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902533493 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902452073 | VALVE | 1 | |
| 5 | R902434482 | SEAL | 2 | |
| 6 | R909156774 | NOZZLE | 1 | |
| 7 | R910359491 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R910764647 | SCREW PLUG | 2 | |
| 9 | R902425366 | PIPING Assembly parts list →L | 1 | |
| 10 | R902504273 | PIPING Assembly parts list →L | 1 | |
| 11 | R902486869 | POWER DIAGRAM | 1 | |
| 12 | R978051899 | MULTISTATION MANIFOLD | 1 | |
| 51 | R909154493 | SAFETY CAP | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 74 | 74 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Reduced diameter; limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Through drive | Without through drive | N00 |