Unit · BASE UNIT
GA10VM45DG/52W1-VWC66N000DR902505350
Base unit Bosch Rexroth series A10VM, type code GA10VM45DG/52W1-VWC66N000D, material number R902505350. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10V). Operating mode: motor, open and closed circuit (M). Control devices: two-point control direct operated, external control pressure supply without on/off valve (DG). Direction of rotation: viewed on drive shaft bi-directional (W). Minimum displacement: vg min [cm3] steplessly adjustable from/to (1). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft similar to ISO 3019-1 for reduced torque (W). Mounting flange: based on ISO 3019-1 (SAE); 2 hole (C). Working port: threaded port according to A and B laterally, Threaded port, UN ISO 11926 same side (66N00). Valves: without valve (0).
- Number
- R902505350
- Type code
- GA10VM45DG/52W1-VWC66N000D
- Group
- A10VM 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902505069 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R910970702 | ADJUSTING PISTON | 1 | |
| 3 | R902439068 | PISTON ROD | 1 | |
| 5 | R902404877 | MOTOR HOUSING | 1 | |
| 6 | R910990669 | CONNECTION PLATE | 1 | |
| 7 | R902443505 | SWASH PLATE | 1 | |
| 8 | R902417393 | DRIVE SHAFT | 1 | |
| 9 | R902447575 | SCREW PLUG Assembly parts list →L | 1 | |
| 12 | R910938955 | ADJUSTMENT SHIM | 1 | |
| 13 | R910933408 | STOP SCREW | 1 | |
| 14 | R910987963 | STOP RING | 1 | |
| 15 | R910704946 | TAPERED-ROLLER BEARING | 1 | |
| 16 | R910704954 | TAPERED-ROLLER BEARING | 1 | |
| 17 | R910933793 | BEARING SHELL | 2 | |
| 20 | R910985471 | SHAFT SEALING RING | 1 | |
| 21 | R913052048 | O-RINGD | 1 | |
| 23 | R910804886 | O-RINGD | 2 | |
| 25 | R902403814 | RETAINING RING | 1 | |
| 27 | R910110256 | SOCKET HEAD CAP SCREW | 4 | |
| 33 | R902533908 | STRAIGHT PIN | 1 | |
| 34 | R910967343 | SCREW PLUG | 1 | |
| 35 | R910998240 | NUT | 1 | |
| 36 | R910961839 | CAP NUT | 1 | |
| 37 | R910764647 | SCREW PLUG | 1 | |
| 38 | R909156493 | NOZZLE | 1 | |
| 39 | R909156651 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10V |
| Operating mode | Motor, open and closed circuit | M |
| Size (NG) | 45 | 45 |
| Control devices | Two-point control direct operated, external control pressure supply without on/off valve | DG |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft bi-directional | W |
| Minimum displacement | Vg min [cm3] steplessly adjustable from/to | 1 |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft similar to ISO 3019-1 for reduced torque | W |
| Mounting flange | Based on ISO 3019-1 (SAE); 2 hole | C |
| Working port | Threaded port according to A and B laterally, Threaded port, UN ISO 11926 same side | 66N00 |
| Valves | Without valve | 0 |