Unit · AXIAL-PISTON PUMP
A A10V O100 DRF /53R-VUC12K68 -S4493R902505552
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO100DRF/53R-VUC12K68-S4493, material number R902505552. Nominal size: NG 100. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with flow controller X-T open hydraulic (DRF). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68). Special version no. 4493.
- Number
- R902505552
- Type code
- A A10V O100 DRF /53R-VUC12K68 -S4493
- Group
- A10VO 100
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902505663 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902511366 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902470943 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R902469010 | SEALING COVER Assembly parts list →L | 1 | |
| 27 | R902436101 | SPLINED COUPLING | 1 | |
| 30 | R902601712 | SCREW PLUG | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 100 | 100 |
| Control device | with flow controller X-T open hydraulic | DRF |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |