Unit · BASE UNIT
GHAA10VSO140 OV /31R-VKD62N00 -S1550R902506169
Base unit Bosch Rexroth series A10VSO, type code GHAA10VSO140OV/31R-VKD62N00-S1550, material number R902506169. Nominal size: NG 140. Version: high-speed version (external dimensions are not affected by this option) (H). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft permissible through-drive torque ISO 3019-1 (K). Working port: SAE flange ports according to ISO 6162, UNC fastening thread laterally opposite (62). Through drive: without through drive (N00). Special version no. 1550.
- Number
- R902506169
- Type code
- GHAA10VSO140 OV /31R-VKD62N00 -S1550
- Group
- A10VSO 140
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910948999 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902538158 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910918191 | PUMP HOUSING | 1 | ||
| R902534410 | CONNECTION PLATE | 1 | ||
| R902409623 | SWASH PLATE | 1 | ||
| R902410695 | DRIVE SHAFT | 1 | ||
| R910935425 | PARALLEL KEY | 1 | ||
| R902425273 | ADJUSTMENT SHIM | 1 | ||
| R910918203 | TAPERED-ROLLER BEARING | 1 | ||
| R910918201 | TAPERED-ROLLER BEARING | 1 | ||
| R910918174 | BEARING SHELL | 2 | ||
| R910978001 | SHAFT SEALING RINGD | 1 | ||
| R910930461 | O-RINGD | 1 | ||
| R913053032 | R-RINGD | 4 | ||
| R910941920 | RETAINING RING | 1 | ||
| R910659169 | SOCKET HEAD CAP SCREW | 4 | ||
| R910967351 | SCREW PLUGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910922017 | STRAIGHT PIN | 1 | ||
| 37 | R902570109 | SEGMENT | 2 | |
| 38 | R902530618 | SOCKET HEAD CAP SCREW | 4 | |
| 39 | R902408275 | SPACER SLEEVE | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | High-speed version (external dimensions are not affected by this option) | H |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft permissible through-drive torque ISO 3019-1 | K |
| Working port | SAE flange ports according to ISO 6162, UNC fastening thread laterally opposite | 62 |
| Through drive | Without through drive | N00 |