Unit · AXIAL-PISTON PUMP
A A10VNO 28 DRF /53L-VSC12K52 -S3691R902511743
Axial piston pump Bosch Rexroth series A10VNO, type code AA10VNO28DRF/53L-VSC12K52-S3691, material number R902511743. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: with flow controller X-T open hydraulic (DRF). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: higher (S). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: according to ISO 6162 laterally opposite for through drive (12). Through drive: 82-2 (A) 3/4 in 11T 16/32DP (K52). Special version no. 3691.
- Number
- R902511743
- Type code
- A A10VNO 28 DRF /53L-VSC12K52 -S3691
- Group
- A10VNO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902504132 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902483319 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902464277 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 17 | R902651077 | PROTECTIVE CAP | 2 | |
| 27 | R902436099 | SPLINED COUPLING | 1 | |
| 30 | R910901969 | SCREW PLUG | 2 | |
| 70 | R902421944 | SHIPPING PROTECTION | 1 | |
| 71 | R902421946 | SHIPPING PROTECTION | 1 | |
| 72 | R902602016 | SEAL SCREW | 1 | |
| 73 | R902602014 | SEAL SCREW | 1 | |
| 74 | R902602975 | FLANGE COVER | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Control device | with flow controller X-T open hydraulic | DRF |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | higher | S |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | according to ISO 6162 laterally opposite for through drive | 12 |
| Through drive | 82-2 (A) 3/4 in 11T 16/32DP | K52 |