Unit · AXIAL-PISTON PUMP
AA10VNO28ED72/53L-VRC13H00P-S3306R902513091
Axial piston pump Bosch Rexroth series A10VNO, type code AA10VNO28ED72/53L-VRC13H00P-S3306, material number R902513091. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: electric U = 24 V (ED72). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "S" however for torque (R). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 3306.
- Number
- R902513091
- Type code
- AA10VNO28ED72/53L-VRC13H00P-S3306
- Group
- A10VNO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902503425 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902531588 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902464277 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 6 | R902480814 | INTERMEDIATE PLATE Assembly parts list →L | 1 | |
| 12 | R902481603 | VANE PUMP | 1 | |
| 27 | R902436099 | SPLINED COUPLING | 1 | |
| 30 | R910901969 | SCREW PLUG | 3 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 | |
| 70 | R902602012 | SEAL SCREW | 1 | |
| 71 | R902602013 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Control device | electric U = 24 V | ED72 |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "S" however for torque | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | 13 | 13 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |