Unit · AXIAL-PISTON PUMP
A A10VSO 45 LA7D /32R-VSB22H00ER902515104
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO45LA7D/32R-VSB22H00E, material number R902515104. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: pressure cut-off from 91 to 160 bar (LA7D). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft standard shaft ISO 3019-1 (S). Mounting flange: ISO 3019-2; 4-hole (B). Port: SAE flange ports fastening thread, metric. top, bottom, opposite, with universal through drive without pulsation damping (22). Rotary group version: standard rotary group noise-optimized for n= 1500/1800 rpm (E).
- Number
- R902515104
- Type code
- A A10VSO 45 LA7D /32R-VSB22H00E
- Group
- A10VSO 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902515105 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902451761 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533220 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902496467 | ATTACHMENT KIT | 1 | |
| 10 | R902491917 | PIPING Assembly parts list →L | 1 | |
| 12 | 1518222696 | HYDRAULIC GEAR PUMPL | 1 | |
| 14 | R910764647 | SCREW PLUG | 1 | |
| 30 | R909156654 | SCREW PLUG | 1 | |
| 34 | R913011609 | SCREW PLUG | 1 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 | |
| 62 | R902650189 | WASHER | 2 | |
| 70 | R902421945 | SHIPPING PROTECTION | 1 | |
| 71 | R902421948 | SHIPPING PROTECTION | 1 | |
| 72 | R902602011 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 45 | 45 |
| Control device | pressure cut-off from 91 to 160 bar | LA7D |
| Series | Series 3, index 2 | 32 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft standard shaft ISO 3019-1 | S |
| Mounting flange | ISO 3019-2; 4-hole | B |
| Port | SAE flange ports fastening thread, metric. top, bottom, opposite, with universal through drive without pulsation damping | 22 |
| Rotary group version | Standard rotary group noise-optimized for n= 1500/1800 rpm | E |