Unit · AXIAL-PISTON PUMP
A A10V O 18LA9DS/53L-VSC12K01 -SO200R902516882
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO18LA9DS/53L-VSC12K01-SO200, material number R902516882. Nominal size: NG 18. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D (LA9DS). Directions of rotation: viewed on drive shaft counter-clockwise (L). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: at bottom, on opposite side, metric fastening thread (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP (K01). Special version no. 200.
- Number
- R902516882
- Type code
- A A10V O 18LA9DS/53L-VSC12K01 -SO200
- Group
- A10VO 18
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902516883 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902496871 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902469008 | SEALING COVER Assembly parts list →L | 1 | |
| 27 | R910943528 | SPLINED COUPLING | 1 | |
| 30 | R910901969 | SCREW PLUG | 2 | |
| 70 | R902421944 | SHIPPING PROTECTION | 1 | |
| 71 | R902421946 | SHIPPING PROTECTION | 1 | |
| 72 | R902602016 | SEAL SCREW | 1 | |
| 73 | R902602014 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 18 | 18 |
| Control devices | pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D | LA9DS |
| Directions of rotation | Viewed on drive shaft counter-clockwise | L |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | at bottom, on opposite side, metric fastening thread | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP | K01 |