Unit · AXIAL-PISTON PUMP
A A10V O 28ED 74/52R-VSC12K68P-S4025R902518922
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO28ED74/52R-VSC12K68P-S4025, material number R902518922. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4025.
- Number
- R902518922
- Type code
- A A10V O 28ED 74/52R-VSC12K68P-S4025
- Group
- A10VO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902459074 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902533316 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902456342 | INTERMEDIATE PLATE | 1 | |
| 6 | R910110159 | SOCKET HEAD CAP SCREW | 4 | |
| 7 | R902434482 | SEAL | 2 | |
| 8 | R910900443 | SOCKET HEAD CAP SCREW | 4 | |
| 11 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 12 | R909157039 | SCREW PLUG | 1 | |
| 70 | R902421944 | SHIPPING PROTECTION | 1 | |
| 71 | R902421946 | SHIPPING PROTECTION | 1 | |
| 72 | R902602016 | SEAL SCREW | 1 | |
| 74 | R902602977 | FLANGE COVER | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |