Unit · AXIAL-PISTON PUMP
A A10V O 72LA9DS/53R-VSD46N00 -S4037R902519355
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO72LA9DS/53R-VSD46N00-S4037, material number R902519355. Nominal size: NG 72. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D (LA9DS). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D). Through drive: without through drive (N00). Special version no. 4037.
- Number
- R902519355
- Type code
- A A10V O 72LA9DS/53R-VSD46N00 -S4037
- Group
- A10VO 72
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902518524 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902472686 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902469716 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R900868651 | ASSEMBLY KIT | 1 | |
| 17 | R902650462 | EQUIPMENT SOCKET | 1 | |
| 28 | R910901969 | SCREW PLUG | 1 | |
| 29 | R910764647 | SCREW PLUG | 1 | |
| 30 | R910967343 | SCREW PLUG | 2 | |
| 40 | R902427032 | STOP SCREW | 1 | |
| 43 | R910804886 | O-RING | 1 | |
| 51 | R910109355 | SOCKET HEAD CAP SCREW | 2 | |
| 70 | R902603192 | SEAL SCREW | 1 | |
| 71 | R902421950 | SHIPPING PROTECTION | 1 | |
| 72 | R902603190 | SEAL SCREW | 1 | |
| 73 | R902602014 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 72 | 72 |
| Control devices | pressure cut-off via 240 bar, separate flow control hydraulic beginning of control.D | LA9DS |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |
| Through drive | Without through drive | N00 |