Unit · BASE UNIT
G A10V O140 OV /32R-VQC12K68R902520470
Base unit Bosch Rexroth series A10VO, type code GA10VO140OV/32R-VQC12K68, material number R902520470. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: at bottom, on opposite side, metric fastening thread (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68).
- Number
- R902520470
- Type code
- G A10V O140 OV /32R-VQC12K68
- Group
- A10VO 140
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902460313 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902448884 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910989744 | PUMP HOUSING | 1 | ||
| R902551207 | CONNECTION PLATE | 1 | ||
| R902409623 | SWASH PLATE | 1 | ||
| R902546524 | DRIVE SHAFT | 1 | ||
| R902436102 | SPLINED COUPLING | 1 | ||
| R902425273 | ADJUSTMENT SHIM | 1 | ||
| R910988055 | STOP RING | 1 | ||
| R910918203 | TAPERED-ROLLER BEARING | 1 | ||
| R910918201 | TAPERED-ROLLER BEARING | 1 | ||
| R910918174 | BEARING SHELL | 2 | ||
| R909831178 | SHAFT SEALING RINGD | 1 | ||
| R910930461 | O-RINGD | 1 | ||
| R913053032 | R-RINGD | 4 | ||
| R910640182 | O-RINGD | 1 | ||
| R910941920 | RETAINING RING | 1 | ||
| R910659169 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910922017 | STRAIGHT PIN | 1 | ||
| R902570109 | SEGMENT | 2 | ||
| R902408275 | SPACER SLEEVE | 4 | ||
| R902530618 | SOCKET HEAD CAP SCREW | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 140 | 140 |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | at bottom, on opposite side, metric fastening thread | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |