Unit · AXIAL-PISTON PUMP
A A10VSO140 DR /32R-CPB32U00E -SO275R902530679
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO140DR/32R-CPB32U00E-SO275, material number R902530679. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: pressure controller hydraulic (DR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid (C). Drive shaft: parallel keyed shaft DIN 6885, limited suitability for through drive (P). Mounting flange: ISO 3019-2; 4-hole (B). Port: SAE flange ports fastening thread, metric. top, bottom, opposite, with universal through drive with pulse damping (32). Through drive: only for port plate 22 and 32, without through drive (U00). Rotary group version: standard rotary group noise-optimized for n= 1500/1800 rpm (E). Special version no. 275.
- Number
- R902530679
- Type code
- A A10VSO140 DR /32R-CPB32U00E -SO275
- Group
- A10VSO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902530860 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902488535 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902496173 | COVER Assembly parts list →L | 1 | |
| 30 | R909153861 | SCREW PLUG | 1 | |
| 34 | R913011601 | SCREW PLUG | 1 | |
| 70 | R902421947 | SHIPPING PROTECTION | 1 | |
| 71 | R902421950 | SHIPPING PROTECTION | 1 | |
| 72 | R902602013 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Control device | Pressure controller hydraulic | DR |
| Series | Series 3, index 2 | 32 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid | C |
| Drive shaft | Parallel keyed shaft DIN 6885, limited suitability for through drive | P |
| Mounting flange | ISO 3019-2; 4-hole | B |
| Port | SAE flange ports fastening thread, metric. top, bottom, opposite, with universal through drive with pulse damping | 32 |
| Through drive | Only for port plate 22 and 32, without through drive | U00 |
| Rotary group version | Standard rotary group noise-optimized for n= 1500/1800 rpm | E |