Unit · AXIAL-PISTON PUMP
AA10VNO85EK1DS/53R-VSD46N00P-S4241R902532885
Axial piston pump Bosch Rexroth series A10VNO, type code AA10VNO85EK1DS/53R-VSD46N00P-S4241, material number R902532885. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged (EK1DS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: higher (S). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4241.
- Number
- R902532885
- Type code
- AA10VNO85EK1DS/53R-VSD46N00P-S4241
- Group
- A10VNO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902532886 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902472686 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902484971 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902530992 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 29 | R910764647 | SCREW PLUG | 1 | |
| 40 | R910947854 | STOP SCREW | 1 | |
| 41 | R910998240 | NUT | 1 | |
| 42 | R910961839 | CAP NUT | 1 | |
| 43 | R910804886 | O-RING | 2 | |
| 70 | R902603192 | SEAL SCREW | 1 | |
| 71 | R902421950 | SHIPPING PROTECTION | 1 | |
| 72 | R902603190 | SEAL SCREW | 1 | |
| 73 | R902602014 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 85 | 85 |
| Control device | pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged | EK1DS |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | higher | S |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | 46 | 46 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |