Unit · AXIAL-PISTON PUMP

AA10VZO010DR000/10R-VSC14N000-DR902535036

Axial piston pump Bosch Rexroth series A10FZO, type code AA10VZO010DR000/10R-VSC14N000-D, material number R902535036. Nominal size: NG 10. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Operating mode: pump, open circuit (O). Control device 003: pressure controller hydraulic (DR000). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft standard shaft ISO 3019-1 (S). Mounting flange 003: based on ISO 3019-1 (SAE) 2-hole (C). Through drive: DIN 3852 threaded ports at rear, not for through drive (14). Through drive 003: without through drive, only port plates 12 and 14 (N). Connector for solenoids 003: without, with hydraulic controllers (0).

Number
R902535036
Type code
AA10VZO010DR000/10R-VSC14N000-D
Group
A10VZO 10
Edition
06/2020

This parts list has no drawing.

Pos.NumberNameQtyAdd to inquiry
1R902474705BASE UNIT Assembly parts list →L1
2R902456118CONTROL VALVE Assembly parts list →L1
70R902602012SEAL SCREW2
71R902602015SEAL SCREW1
75R909830326NAMEPLATE1

Parameters from the type code

ItemMeaningCode
Axial piston unitSwashplate design, variableA10V
Application areaVariable-speed drivesZ
Operating modePump, open circuitO
Size (NG)10010
Control device 003Pressure controller hydraulicDR000
SeriesSeries 1, index 010
Direction of rotation 003Viewed on drive shaft clockwiseR
Sealing material 003FKM (fluorocarbon rubber)V
Drive shaft 003Splined shaft standard shaft ISO 3019-1S
Mounting flange 003Based on ISO 3019-1 (SAE) 2-holeC
Through driveDIN 3852 threaded ports at rear, not for through drive14
Through drive 003Without through drive, only port plates 12 and 14N
Connector for solenoids 003Without, with hydraulic controllers0