Unit · AXIAL-PISTON PUMP
A A10VNO 45ED 72/52R-VRC12H00P -S4358R902537617
Axial piston pump Bosch Rexroth series A10VNO, type code AA10VNO45ED72/52R-VRC12H00P-S4358, material number R902537617. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: electric U = 24 V (ED72). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "S" however for torque (R). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: according to ISO 6162 laterally opposite for through drive (12). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4358.
- Number
- R902537617
- Type code
- A A10VNO 45ED 72/52R-VRC12H00P -S4358
- Group
- A10VNO 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902537618 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902533400 | CONTROL VALVE Assembly parts list →L | 1 | |
| 6 | R902480814 | INTERMEDIATE PLATE Assembly parts list →L | 1 | |
| 12 | R902489461 | VANE PUMP | 1 | |
| 34 | R910901969 | SCREW PLUG | 1 | |
| 38 | R902651075 | O-RING | 1 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 45 | 45 |
| Control device | electric U = 24 V | ED72 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "S" however for torque | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | according to ISO 6162 laterally opposite for through drive | 12 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |