Unit · AXIAL-PISTON PUMP
AL A10VNO 63ED 72/52L-VSC11N00P -S4335R902538692
Axial piston pump Bosch Rexroth series A10VNO, type code ALA10VNO63ED72/52L-VSC11N00P-S4335, material number R902538692. Nominal size: NG 63. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: electric U = 24 V (ED72). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: higher (S). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: according to ISO 6162 rear not for through drive (11). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4335.
- Number
- R902538692
- Type code
- AL A10VNO 63ED 72/52L-VSC11N00P -S4335
- Group
- A10VNO 63
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902505282 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902547817 | CONTROL VALVE Assembly parts list →L | 1 | |
| 6 | R910126454 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R902434482 | SEAL | 2 | |
| 9 | R902493534 | INTERMEDIATE PLATE | 1 | |
| 57 | R909831568 | SAFETY CAP | 1 | |
| 58 | R902532435 | SAFETY CAP | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 63 | 63 |
| Control device | electric U = 24 V | ED72 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | higher | S |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | according to ISO 6162 rear not for through drive | 11 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |