Unit · AXIAL-PISTON PUMP
AP A10V O140 DFR1/31R-VQC61N00P -S4373R902543312
Axial piston pump Bosch Rexroth series A10VO, type code APA10VO140DFR1/31R-VQC61N00P-S4373, material number R902543312. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged, with flushing function (DFR1). Direction of rotation: viewed on drive shaft Clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive (61). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH - molded connector, 2-pin, without suppressor diode (P). Special version no. 4373.
- Number
- R902543312
- Type code
- AP A10V O140 DFR1/31R-VQC61N00P -S4373
- Group
- A10VO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902543313 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902451555 | CONTROL VALVE Assembly parts list →L | 1 | |
| 6 | R910917808 | SIDE MARKER RING | 1 | |
| 7 | R902650500 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R902434482 | SEAL | 1 | |
| 13 | R902459669 | INTERMEDIATE PLATE Assembly parts list →L | 1 | |
| 14 | R910764647 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Control device | With flow controller X-T plugged, with flushing function | DFR1 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive | 61 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH - molded connector, 2-pin, without suppressor diode | P |