Unit · BASE UNIT
G A10VZO 18 OV /10R-VRC12N00 LRR902544342
Base unit Bosch Rexroth series A10FZO, type code GA10VZO18OV/10R-VRC12N00LR, material number R902544342. Nominal size: NG 18. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Operating mode: pump, open circuit (O). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft ISO 3019-1 similar to shaft "S" however for higher torque (R). Mounting flange 003: based on ISO 3019-1 (SAE) 2-hole (C). Through drive 003: without through drive, only port plates 12 and 14 (N). Connector for solenoids 003: without, with hydraulic controllers (0).
- Number
- R902544342
- Type code
- G A10VZO 18 OV /10R-VRC12N00 LR
- Group
- A10VZO 18
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902543717 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902538122 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902518090 | PUMP HOUSING | 1 | ||
| R910976709 | CONNECTION PLATE | 1 | ||
| R902518721 | SWASH PLATE | 1 | ||
| R902413744 | DRIVE SHAFT | 1 | ||
| R902400729 | ADJUSTMENT SHIM | 1 | ||
| R910704954 | TAPERED-ROLLER BEARING | 1 | ||
| R909086994 | TAPERED-ROLLER BEARING | 1 | ||
| R910925266 | BEARING SHELL | 2 | ||
| R910900853 | SHAFT SEALING RINGD | 1 | ||
| R910928325 | O-RINGD | 1 | ||
| R913052100 | R-RINGD | 4 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910231991 | SOCKET HEAD CAP SCREW | 4 | ||
| R909157039 | SCREW PLUGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910277193 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable | A10V |
| Application area | Variable-speed drives | Z |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 18 | 18 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation 003 | Viewed on drive shaft clockwise | R |
| Sealing material 003 | FKM (fluorocarbon rubber) | V |
| Drive shaft 003 | Splined shaft ISO 3019-1 similar to shaft "S" however for higher torque | R |
| Mounting flange 003 | Based on ISO 3019-1 (SAE) 2-hole | C |
| Through drive 003 | Without through drive, only port plates 12 and 14 | N |
| Connector for solenoids 003 | Without, with hydraulic controllers | 0 |