Unit · AXIAL-PISTON PUMP
AL A10V O 71 DFLR/31R-VSC92K07 -SO108R902546571
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO71DFLR/31R-VSC92K07-SO108, material number R902546571. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft Clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom (92). Through drive: 127-2 (C) 1 1/4 in 14T 12/24DP (K07). Special version no. 108.
- Number
- R902546571
- Type code
- AL A10V O 71 DFLR/31R-VSC92K07 -SO108
- Group
- A10VO 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902501741 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902448799 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R910932938 | ADAPTER Assembly parts list →L | 1 | |
| 5 | R910996456 | DIRECTIONAL SPOOL VALVE Assembly parts list →L | 1 | |
| 6 | R902472640 | CONTROL BLOCK Assembly parts list →L | 1 | |
| 7 | R902650500 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R902434482 | SEAL | 1 | |
| 9 | R910785105 | SOCKET HEAD CAP SCREW | 4 | |
| 10 | R910965671 | PIPING Assembly parts list →L | 1 | |
| 11 | R902413907 | POWER DIAGRAM | 1 | |
| 12 | R910764647 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 71 | 71 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom | 92 |
| Through drive | 127-2 (C) 1 1/4 in 14T 12/24DP | K07 |