Unit · AXIAL-PISTON PUMP
P A4VSG 71 EPG /11R-VZB10L314N-S1269R902547393
Axial piston pump Bosch Rexroth series A4VSG, type code PA4VSG71EPG/11R-VZB10L314N-S1269, material number R902547393. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure (A4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft DIN 5480 (Z). Mounting flange: based on ISO 3019-2 metric 4-hole (B). Working port: SAE flange ports A and B, located on same side, metric fastening thread (10). Valves: SDVB valve block mounted 16 (4). Filtration: without filter (N). Special version no. 1269.
- Number
- R902547393
- Type code
- P A4VSG 71 EPG /11R-VZB10L314N-S1269
- Group
- A4VSG 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902454802 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902545891 | CONTROL Assembly parts list →L | 1 | |
| 6 | R902447981 | VALVE INSERT | 2 | |
| 8 | R902443328 | PIPING Assembly parts list →L | 1 | |
| 9 | R902512111 | VALVE BLOCK Assembly parts list →L | 1 | |
| 16 | 0510765067 | HYDRAULIC GEAR PUMPL | 1 | |
| 17 | R909153930 | SCREW PLUG | 3 | |
| 18 | R902407299 | ADAPTER | 1 | |
| 19 | R909153837 | O-RING | 1 | |
| 61 | R902805708 | SHIPPING PROTECTION | 2 | |
| 62 | R902602012 | SEAL SCREW | 1 | |
| 64 | R902602012 | SEAL SCREW | 1 | |
| 65 | R902602011 | SEAL SCREW | 1 | |
| 71 | R902421944 | SHIPPING PROTECTION | 3 | |
| 72 | R902421945 | SHIPPING PROTECTION | 1 | |
| 81 | R910723126 | PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure | A4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 71 | 71 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Mounting flange | Based on ISO 3019-2 metric 4-hole | B |
| Working port | SAE flange ports A and B, located on same side, metric fastening thread | 10 |
| Valves | SDVB valve block mounted 16 | 4 |
| Filtration | Without filter | N |