Unit · AXIAL-PISTON MOTOR
AL A10VER 45 EZ6 /52R-VCF16N000P -S4857R902551385
Axial piston motor Bosch Rexroth series A10VER, type code ALA10VER45EZ6/52R-VCF16N000P-S4857, material number R902551385. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10V). Operating mode: motor, plug-in version, open circuit; reversible +/- 100% (ER). Control device: two-point control electric with switching solenoid U = 12 V with switching time orifice (EZ6). Direction of rotation: viewed on drive shaft clockwise (cooling operation) (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: tapered shaft with shaft key and UNF threaded bolt (C). Mounting flange: special flange similar to SAE J744 101-2 (B) version with bore (F). Working port Position: threaded port, metric same side (16N00). Valves: without (0). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4857.
- Number
- R902551385
- Type code
- AL A10VER 45 EZ6 /52R-VCF16N000P -S4857
- Group
- A10VER 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902551386 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902548542 | VALVE | 1 | |
| 20 | R902420752 | THROTTLE SCREW | 1 | |
| 21 | R909410814 | THROTTLE PIN | 1 | |
| 22 | R909400263 | THROTTLE SCREW | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10V |
| Operating mode | Motor, plug-in version, open circuit; reversible +/- 100% | ER |
| Size (NG) | 45 | 45 |
| Control device | Two-point control electric with switching solenoid U = 12 V with switching time orifice | EZ6 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft clockwise (cooling operation) | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Tapered shaft with shaft key and UNF threaded bolt | C |
| Mounting flange | Special flange similar to SAE J744 101-2 (B) version with bore | F |
| Working port Position | Threaded port, metric same side | 16N00 |
| Valves | Without | 0 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |