Unit · AXIAL-PISTON PUMP
AL A10V O140 DRS /32R-VSD32U00E -S4866R902551818
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO140DRS/32R-VSD32U00E-S4866, material number R902551818. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged with flushing function (DRS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric not for through drive NG 28 with laterally and with pre through drive at NG 60 compression volume (PCV) (32). Special version no. 4866.
- Number
- R902551818
- Type code
- AL A10V O140 DRS /32R-VSD32U00E -S4866
- Group
- A10VO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902516140 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902556404 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902496173 | COVER Assembly parts list →L | 1 | |
| 30 | R910967351 | SCREW PLUG | 1 | |
| 34 | R913011609 | SCREW PLUG | 1 | |
| 70 | R902400584 | FLANGE COVER | 1 | |
| 71 | R902400594 | FLANGE COVER | 1 | |
| 72 | R902603191 | SEAL SCREW | 1 | |
| 73 | R902602014 | SEAL SCREW | 1 | |
| 75 | R909830326 | NAMEPLATE | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Control device | with flow controller X-T plugged with flushing function | DRS |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric not for through drive NG 28 with laterally and with pre through drive at NG 60 compression volume (PCV) | 32 |