Unit · AXIAL-PISTON PUMP
AL A10V O140 DRS /32R-VQC61N00P -S4885R902552406
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO140DRS/32R-VQC61N00P-S4885, material number R902552406. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: with flow controller X-T plugged with flushing function (DRS). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: (port plates and through drive assignment, at rear, UNC fastening thread (not for through drive, "N00" only) (61). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH molded connector, 2-pin – without suppressor diode (P). Special version no. 4885.
- Number
- R902552406
- Type code
- AL A10V O140 DRS /32R-VQC61N00P -S4885
- Group
- A10VO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902552407 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902451555 | CONTROL VALVE Assembly parts list →L | 1 | |
| 6 | R910917808 | SIDE MARKER RING | 1 | |
| 7 | R902650500 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R902434482 | SEAL | 1 | |
| 13 | R902459669 | INTERMEDIATE PLATE Assembly parts list →L | 1 | |
| 14 | R910764647 | SCREW PLUG | 1 | |
| 30 | R910967351 | SCREW PLUG | 1 | |
| 50 | R902485955 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 140 | 140 |
| Control devices | with flow controller X-T plugged with flushing function | DRS |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | (port plates and through drive assignment, at rear, UNC fastening thread (not for through drive, "N00" only) | 61 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH molded connector, 2-pin – without suppressor diode | P |