Unit · AXIAL-PISTON PUMP
P AA4VSG 180 EPG /30R-PSD60K079N-SO214R902553836
Axial piston pump Bosch Rexroth series A4VSG, type code PAA4VSG180EPG/30R-PSD60K079N-SO214, material number R902553836. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi SAE (350 bar), maximum pressure 5800 psi (400 bar) (AA4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft ISO 3019-1 (S). Mounting flange: in accordance with ISO 3019-1 SAE 4-hole (D). Working port: SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread (60). Through drives: 127-2 (C) 1 1/4 in 14T 12/24DP (K07). Valves: SDVB valve block mounted (9). Filtration: without filter (N). Special version no. 214.
- Number
- R902553836
- Type code
- P AA4VSG 180 EPG /30R-PSD60K079N-SO214
- Group
- A4VSG 180
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902553848 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902554776 | CONTROL Assembly parts list →L | 1 | |
| 5 | R910929328 | VALVE MOUNTING KIT | 1 | |
| 6 | R910929298 | VALVE MOUNTING KIT | 1 | |
| 9 | R910932400 | VALVE BLOCK Assembly parts list →L | 1 | |
| 22 | R910712477 | ADAPTER | 2 | |
| 23 | R910111201 | O-RING | 2 | |
| 24 | R910984004 | ADAPTER Assembly parts list →L | 3 | |
| 25 | R909153371 | SCREW PLUG | 1 | |
| 61 | R902421947 | SHIPPING PROTECTION | 2 | |
| 62 | R902603192 | SEAL SCREW | 1 | |
| 64 | R902603190 | SEAL SCREW | 1 | |
| 65 | R902603190 | SEAL SCREW | 1 | |
| 71 | R902557497 | FLANGE COVER Assembly parts list →L | 1 | |
| 81 | R902602015 | SEAL SCREW | 2 | |
| 82 | R910723126 | PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi SAE (350 bar), maximum pressure 5800 psi (400 bar) | AA4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 180 | 180 |
| Series | Series 3, index 0 | 30 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft ISO 3019-1 | S |
| Mounting flange | In accordance with ISO 3019-1 SAE 4-hole | D |
| Working port | SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread | 60 |
| Through drives | 127-2 (C) 1 1/4 in 14T 12/24DP | K07 |
| Valves | SDVB valve block mounted | 9 |
| Filtration | Without filter | N |