Unit · AXIAL-PISTON MOTOR

AL A10V M 45EP2/53R-VRC16N002P-S4928PTR902554711

Axial piston motor Bosch Rexroth series A10VM, type code ALA10VM45EP2/53R-VRC16N002P-S4928*PT*, material number R902554711. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10V). Operating mode: motor, open and closed circuit (M). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft similar to ISO 3019-1 for high torque (R). Mounting flange: based on ISO 3019-1 (SAE); 2 hole (C). Working port: threaded port according to A and B laterally, Threaded port, metric DIN 3852-1 same side (16N00). Connector for solenoids: DEUTSCH - molded connector, 2-pin – without suppressor diode (P).

Number: R902554711
Type code: AL A10V M 45EP2/53R-VRC16N002P-S4928*PT*
Group: A10VM 45
Edition: 06/2020

This parts list has no drawing.

Pos.	Number	Name	Qty
1	R902554712	BASE UNIT Assembly parts list →L	1
3	R902554713	CONTROL VALVE Assembly parts list →L	1
4	R902497708	ADJUSTING PIECE Assembly parts list →L	1
30	R910967343	SCREW PLUG	3
40	R910947854	STOP SCREW	1
41	R910998240	NUT	1
42	R910961839	CAP NUT	1
43	R910804886	O-RING	2
50	R902516395	SWIVEL ANGLE SENSOR Assembly parts list →L	1

Parameters from the type code

Item	Meaning	Code
Axial piston unit	Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar	A10V
Operating mode	Motor, open and closed circuit	M
Size (NG)	45	45
Sealing material	FKM (fluorocarbon rubber)	V
Drive shaft	Splined shaft similar to ISO 3019-1 for high torque	R
Mounting flange	Based on ISO 3019-1 (SAE); 2 hole	C
Working port	Threaded port according to A and B laterally, Threaded port, metric DIN 3852-1 same side	16N00
Connector for solenoids	DEUTSCH - molded connector, 2-pin – without suppressor diode	P