Unit · BASE UNIT
GA4VSG180M/30R-VZB10KB3R902554895
Base unit Bosch Rexroth series A4VSG, type code GA4VSG180M/30R-VZB10KB3, material number R902554895. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure (A4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft DIN 5480 (Z). Mounting flange: based on ISO 3019-2 metric 4-hole (B). Working port: SAE flange ports A and B, located on same side, metric fastening thread (10). Through-drive: 100, 2-hole 7/8 in 13T 16/32DP (KB3).
- Number
- R902554895
- Type code
- GA4VSG180M/30R-VZB10KB3
- Group
- A4VSG 180
- Edition
- 07/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902403967 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910995243 | PUMP HOUSING | 1 | ||
| R902516946 | CONNECTION PLATE Assembly parts list →L | 1 | ||
| R910970503 | INDICATING DEVICE Assembly parts list →L | 1 | ||
| R910929476 | STUD BOLT Assembly parts list →L | 1 | ||
| R902489971 | SPLINED COUPLING | 1 | ||
| R910513016 | SOCKET HEAD CAP SCREW | 4 | ||
| R910209228 | SOCKET HEAD CAP SCREW | 4 | ||
| R909156652 | SCREW PLUGD | 3 | ||
| R909153930 | SCREW PLUGD | 1 | ||
| R910935634 | O-RINGD | 1 | ||
| R910942133 | R-RINGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 2 | ||
| R910995345 | THROTTLE SCREW | 1 | ||
| R910922276 | NOZZLE | 1 | ||
| R910979852 | REFERENCE PLATE | 1 | ||
| R910936812 | O-RING | 1 | ||
| R910109762 | SOCKET HEAD CAP SCREW | 2 | ||
| R902650190 | WASHER | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure | A4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 180 | 180 |
| Series | Series 3, index 0 | 30 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Mounting flange | Based on ISO 3019-2 metric 4-hole | B |
| Working port | SAE flange ports A and B, located on same side, metric fastening thread | 10 |
| Through-drive | 100, 2-hole 7/8 in 13T 16/32DP | KB3 |