Unit · BASE UNIT
G A10V O 45 OV/32R-VSC12K68 LRR902555004
Base unit Bosch Rexroth series A10VO, type code GA10VO45OV/32R-VSC12K68LR, material number R902555004. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: at bottom, on opposite side, metric fastening thread (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68).
- Number
- R902555004
- Type code
- G A10V O 45 OV/32R-VSC12K68 LR
- Group
- A10VO 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902489709 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R910910852 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R902546053 | PUMP HOUSING | 1 | |
| 6 | R902432772 | CONNECTION PLATE | 1 | |
| 7 | R910961029 | SWASH PLATE Assembly parts list →L | 1 | |
| 8 | R902556160 | DRIVE SHAFT | 1 | |
| 10 | R902436084 | SPLINED COUPLING | 1 | |
| 12 | R910938955 | ADJUSTMENT SHIM | 1 | |
| 14 | R910987963 | STOP RING | 1 | |
| 15 | R910704946 | TAPERED-ROLLER BEARING | 1 | |
| 16 | R910704954 | TAPERED-ROLLER BEARING | 1 | |
| 17 | R910900198 | BEARING SHELL | 2 | |
| 20 | R910985471 | SHAFT SEALING RINGD | 1 | |
| 22 | R910793698 | O-RINGD | 1 | |
| 23 | R913052111 | R-RINGD | 4 | |
| 24 | R910640182 | O-RING | 1 | |
| 25 | R902403814 | RETAINING RING | 1 | |
| 27 | R910220264 | SOCKET HEAD CAP SCREW | 4 | |
| 31 | R909831319 | DOUBLE BREAK-OFF PLUG | 1 | |
| 33 | R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 45 | 45 |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | at bottom, on opposite side, metric fastening thread | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |