Unit · AXIAL-PISTON PUMP
A A10VSO 28 DFR1/31R-VPA12N00H -S2308R902555329
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO28DFR1/31R-VPA12N00H-S2308, material number R902555329. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged, with flushing function (DFR1). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: without through drive (N00). Connector for solenoids: HIRSCHMANN connector – without suppressor diode (H). Special version no. 2308.
- Number
- R902555329
- Type code
- A A10VSO 28 DFR1/31R-VPA12N00H -S2308
- Group
- A10VSO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910907362 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902448799 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902409426 | ADAPTER Assembly parts list →L | 1 | |
| 6 | R902493865 | VALVE PLATE Assembly parts list →L | 1 | |
| 7 | R902514597 | PIPING Assembly parts list →L | 1 | |
| 8 | R902434482 | SEAL | 1 | |
| 9 | R902650500 | SOCKET HEAD CAP SCREW | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Control device | with flow controller X-T plugged, with flushing function | DFR1 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | HIRSCHMANN connector – without suppressor diode | H |