Unit · AXIAL-PISTON PUMP
ALA10VO72EK1ED/53R-VWC12H00P-S4415R902556183
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO72EK1ED/53R-VWC12H00P-S4415, material number R902556183. Nominal size: NG 72. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: electrohydraulic pressure control with U = 12 V controller cut-off (EK1ED). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "U", however for higher torque only conditionally suitable for mounting with through drive. For mounting options (W). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 4415.
- Number
- R902556183
- Type code
- ALA10VO72EK1ED/53R-VWC12H00P-S4415
- Group
- A10VO 72
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902539554 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902549657 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902484971 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902510189 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 12 | R983074189 | HYDRAULIC GEAR PUMP | 1 | |
| 27 | R910943545 | SPLINED COUPLING | 1 | |
| 30 | R910967343 | SCREW PLUG | 3 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 72 | 72 |
| Control device | electrohydraulic pressure control with U = 12 V controller cut-off | EK1ED |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "U", however for higher torque only conditionally suitable for mounting with through drive. For mounting options | W |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |