Unit · BASE UNIT
GA10VOH145DR/60R-VSD12K68-S5045R902557909
Base unit Bosch Rexroth series A10VO, type code GA10VOH145DR/60R-VSD12K68-S5045, material number R902557909. Nominal size: NG 145. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Control devices: pressure controller hydraulic (DR). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D). Working port: at bottom, on opposite side, metric fastening thread (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68). Special version no. 5045.
- Number
- R902557909
- Type code
- GA10VOH145DR/60R-VSD12K68-S5045
- Group
- A10VOH 145
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902556801 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902473753 | COMPRESSION SPRING | 1 | |
| 3 | R902536874 | BALL STOP | 1 | |
| 4 | R902554612 | PUMP HOUSING | 1 | |
| 6 | R902557007 | CONNECTION PLATE | 1 | |
| 7 | R902558656 | SWASH PLATE | 1 | |
| 8 | R902555031 | DRIVE SHAFT | 1 | |
| 10 | R910573345 | COMPRESSION SPRING | 1 | |
| 15 | R913053890 | SELF-ALIGN ROLLER BEARING | 1 | |
| 16 | R913003789 | SELF-ALIGN ROLLER BEARING | 1 | |
| 17 | R902554733 | BEARING SHELL | 2 | |
| 18 | R902555023 | BEARING COVER | 1 | |
| 19 | R902419666 | COUNTERSUNK-HEAD SCREW | 2 | |
| 20 | R909831178 | SHAFT SEALING RINGD | 2 | |
| 21 | R902650271 | O-RINGD | 1 | |
| 22 | R910943498 | O-RING | 1 | |
| 24 | R910942133 | R-RINGD | 2 | |
| 25 | R909083363 | RETAINING RING | 1 | |
| 27 | R910659169 | SOCKET HEAD CAP SCREW | 4 | |
| 28 | R902650193 | WASHER | 4 | |
| 31 | R909831318 | DOUBLE BREAK-OFF PLUG | 3 | |
| 33 | R902533908 | STRAIGHT PIN | 1 | |
| 39 | R910640182 | O-RING | 1 | |
| 70 | R910970159 | PLUG | 1 | |
| 71 | R910973909 | GUARD PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Sizes (NG) | 145 | 145 |
| Control devices | Pressure controller hydraulic | DR |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |
| Working port | at bottom, on opposite side, metric fastening thread | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |