Unit · BASE UNIT
GA10VZO003OV/10R-VSC14N00R902558631
Base unit Bosch Rexroth series A10FZO, type code GA10VZO003OV/10R-VSC14N00, material number R902558631. Nominal size: NG 3. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Operating mode: pump, open circuit (O). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft standard shaft ISO 3019-1 (S). Mounting flange 003: based on ISO 3019-1 (SAE) 2-hole (C). Through drive: DIN 3852 threaded ports at rear, not for through drive (14). Through drive 003: without through drive, only port plates 12 and 14 (N). Connector for solenoids 003: without, with hydraulic controllers (0).
- Number
- R902558631
- Type code
- GA10VZO003OV/10R-VSC14N00
- Group
- A10VZO 3
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902543705 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902422292 | ADJUSTING PISTON | 1 | ||
| R910984013 | PISTON GUIDE | 1 | ||
| R910984014 | BALL STOP | 1 | ||
| R902493940 | PUMP HOUSING | 1 | ||
| R910989933 | CONNECTION PLATE | 1 | ||
| R902493939 | SWASH PLATE | 1 | ||
| R902413728 | DRIVE SHAFT | 1 | ||
| R910987961 | SEALING FLANGE | 1 | ||
| R910984023 | COMPRESSION SPRING | 1 | ||
| R910918608 | SETSCREW | 1 | ||
| R910984871 | DEEP-GROOVE BALL BEARING | 1 | ||
| R910984012 | NEEDLE BEARING | 1 | ||
| R910972683 | BEARING SHELL | 1 | ||
| R910985220 | BEARING SHELL | 1 | ||
| R902400728 | ROTARY SHAFT LIP SEALD | 1 | ||
| R902650501 | O-RINGD | 1 | ||
| R910977816 | O-RINGD | 1 | ||
| R910942133 | R-RING | 1 | ||
| R910791555 | V-RING | 1 | ||
| R910984021 | RETAINING RING | 1 | ||
| R910984872 | V-RING | 1 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910231991 | SOCKET HEAD CAP SCREW | 4 | ||
| R909157039 | SCREW PLUGD | 1 | ||
| R909831317 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910757519 | STRAIGHT PIN | 1 | ||
| R902493938 | CAP NUT | 1 | ||
| R910642827 | BONDED SEAL RING | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable | A10V |
| Application area | Variable-speed drives | Z |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 3 | 003 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation 003 | Viewed on drive shaft clockwise | R |
| Sealing material 003 | FKM (fluorocarbon rubber) | V |
| Drive shaft 003 | Splined shaft standard shaft ISO 3019-1 | S |
| Mounting flange 003 | Based on ISO 3019-1 (SAE) 2-hole | C |
| Through drive | DIN 3852 threaded ports at rear, not for through drive | 14 |
| Through drive 003 | Without through drive, only port plates 12 and 14 | N |
| Connector for solenoids 003 | Without, with hydraulic controllers | 0 |