Unit · BASE UNIT
GA10VOH145DR/60BLVD4R112U0-S4830R902560135
Base unit Bosch Rexroth series A10VOH, type code GA10VOH145DR/60BLVD4R112U0-S4830, material number R902560135. Axial piston unit: swashplate design, variable (A10V). Operating mode: pump, open circuit (O). Pressure range: high pressure version, nominal pressure 320 bar, maximum pressure 420 bar (H). Additional controller function pressure control (can only be combined with EP4): pressure Hydraulic Fixed setting controller (DR). Reduction of the geometric displacement Vg min and Vg max 145: displacement: Vg min = 0 cm Vg max = Vg max (0).
- Number
- R902560135
- Type code
- GA10VOH145DR/60BLVD4R112U0-S4830
- Group
- A10VOH 145
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902559732 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902565120 | PUMP HOUSING | 1 | ||
| R902555818 | CONNECTION PLATE | 1 | ||
| R902555026 | DRIVE SHAFT | 1 | ||
| R902564655 | COMPRESSION SPRING | 1 | ||
| R910906878 | ADJUSTMENT SHIM | 1 | ||
| R902564087 | TAPERED-ROLLER BEARING | 1 | ||
| R902564088 | TAPERED-ROLLER BEARING | 1 | ||
| R902554733 | BEARING SHELL | 2 | ||
| R902562478 | FITTING SCREW | 2 | ||
| R909831179 | ROTARY SHAFT LIP SEALD | 2 | ||
| R902650271 | O-RINGD | 1 | ||
| R902600578 | O-RING | 1 | ||
| R910942133 | R-RINGD | 2 | ||
| R909832149 | RETAINING RING | 1 | ||
| R900002955 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 3 | ||
| R902533908 | STRAIGHT PIN | 1 | ||
| R910970159 | PLUG | 1 | ||
| R910973909 | GUARD PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable | A10V |
| Operating mode | Pump, open circuit | O |
| Pressure range | High pressure version, nominal pressure 320 bar, maximum pressure 420 bar | H |
| Additional controller function pressure control (can only be combined with EP4) | Pressure Hydraulic Fixed setting controller | DR |
| Series | Series 6, index 0 | 60 |
| Viewed on drive shaft Counter-clockwise | L | |
| Single shaft seal ring FKM (fluorocarbon rubber), O-ring FKM (fluorocarbon rubber) | V | |
| Based on ISO 3019-1 (SAE J744) 152-4 (D) | D4 | |
| Splined shaft 1 3/4 in 13T 8/16DP ANSI B92.1a | R1 | |
| Without noise optimization | 0 | |
| Reduction of the geometric displacement Vg min and Vg max 145 | Displacement: Vg min = 0 cm Vg max = Vg max | 0 |