Unit · AXIAL-PISTON PUMP
A A10VNO 85 DRS /53L-VRD12K01P -S5237R902561980
Axial piston pump Bosch Rexroth series A10VNO, type code AA10VNO85DRS/53L-VRD12K01P-S5237, material number R902561980. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) (A10VN). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged with flushing function (DRS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: similar to shaft "S" however for torque (R). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Working port: according to ISO 6162 laterally opposite for through drive (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP (K01). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 5237.
- Number
- R902561980
- Type code
- A A10VNO 85 DRS /53L-VRD12K01P -S5237
- Group
- A10VNO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902505616 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902517102 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902503209 | SERVO UNIT Assembly parts list →L | 1 | |
| 6 | R910359491 | SOCKET HEAD CAP SCREW | 4 | |
| 7 | R930065311 | VALVE BLOCK | 1 | |
| 8 | R902434482 | SEAL | 2 | |
| 9 | R909831743 | SCREW PLUG | 1 | |
| 27 | R910943545 | SPLINED COUPLING | 1 | |
| 30 | R902601710 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 210 bar (3050 psi), maximum pressure 250 bar (3600 psi) | A10VN |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 85 | 85 |
| Control device | with flow controller X-T plugged with flushing function | DRS |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | similar to shaft "S" however for torque | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | according to ISO 6162 laterally opposite for through drive | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP | K01 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |