Unit · BASE UNIT
G A10VSO100 DFLR/31R-VPB12N00 GO2-MASTERR902566028
Base unit Bosch Rexroth series A10VSO, type code GA10VSO100DFLR/31R-VPB12N00GO2-MASTER, material number R902566028. Nominal size: NG 100. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: without through drive (N00).
- Number
- R902566028
- Type code
- G A10VSO100 DFLR/31R-VPB12N00 GO2-MASTER
- Group
- A10VSO 100
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910960134 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R910932943 | ADAPTER Assembly parts list →L | 1 | |
| 10 | R910960131 | PIPING Assembly parts list →L | 1 | |
| 11 | R902413496 | POWER DIAGRAM | 1 | |
| 11 | R902472534 | POWER DIAGRAM | 1 | |
| 11 | R910907515 | POWER DIAGRAM | 1 | |
| 11 | R910910047 | POWER DIAGRAM | 1 | |
| 11 | R910910063 | POWER DIAGRAM | 1 | |
| 11 | R910910068 | POWER DIAGRAM | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 100 | 100 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | Without through drive | N00 |