Unit · BASE UNIT

G A10VZO3-10XXX/10R-VSC14N00X GO2-MASTERR902566044

Base unit Bosch Rexroth series A10FZO, type code GA10VZO3-10XXX/10R-VSC14N00XGO2-MASTER, material number R902566044. Nominal size: NG 10. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft standard shaft ISO 3019-1 (S). Mounting flange 003: based on ISO 3019-1 (SAE) 2-hole (C). Through drive: DIN 3852 threaded ports at rear, not for through drive (14). Through drive 003: without through drive, only port plates 12 and 14 (N). Connector for solenoids 003: without, with hydraulic controllers (0).

Number
R902566044
Type code
G A10VZO3-10XXX/10R-VSC14N00X GO2-MASTER
Group
A10VZO 310
Edition
07/2020

This parts list has no drawing.

Pos.NumberNameQtyAdd to inquiry
1R902543614BASE UNIT Assembly parts list →L1
1R902558631BASE UNIT Assembly parts list →L1
1R902558632BASE UNIT Assembly parts list →L1
1R902558633BASE UNIT Assembly parts list →L1
2R902413378VALVE Assembly parts list →L1
2R902453112CONTROL VALVE Assembly parts list →L1
3R902496682VALVE HOUSING Assembly parts list →L1

Parameters from the type code

ItemMeaningCode
Axial piston unitSwashplate design, variableA10V
Application areaVariable-speed drivesZ
Size (NG)1010
SeriesSeries 1, index 010
Direction of rotation 003Viewed on drive shaft clockwiseR
Sealing material 003FKM (fluorocarbon rubber)V
Drive shaft 003Splined shaft standard shaft ISO 3019-1S
Mounting flange 003Based on ISO 3019-1 (SAE) 2-holeC
Through driveDIN 3852 threaded ports at rear, not for through drive14
Through drive 003Without through drive, only port plates 12 and 14N
Connector for solenoids 003Without, with hydraulic controllers0