Unit · BASE UNIT
GA10VSO28OV/31R-ASA12N00R902566965
Base unit Bosch Rexroth series A10VSO, type code GA10VSO28OV/31R-ASA12N00, material number R902566965. Nominal size: NG 28. Version: standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Sealing material and ATEX version: FKM (fluoroelastomer) and ATEX version II 3G Ex h IIC T4-T1 Gc X (A). Drive shafts: splined shaft Standard shaft ANSI B92.1a (S). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports, laterally opposite fastening thread, metric (12). Through drives: without through drive (N00).
- Number
- R902566965
- Type code
- GA10VSO28OV/31R-ASA12N00
- Group
- A10VSO 28
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902439597 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902538139 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902559711 | PUMP HOUSING | 1 | ||
| R910989739 | CONNECTION PLATE | 1 | ||
| R910960813 | SWASH PLATE | 1 | ||
| R902417366 | DRIVE SHAFT | 1 | ||
| R902400789 | ADJUSTMENT SHIM | 1 | ||
| R902438109 | TAPERED-ROLLER BEARING | 1 | ||
| R902438110 | TAPERED-ROLLER BEARING | 1 | ||
| R910902778 | BEARING SHELL | 2 | ||
| R910916103 | SHAFT SEALING RINGD | 1 | ||
| R910976090 | O-RINGD | 1 | ||
| R913052104 | R-RINGD | 4 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910110191 | SOCKET HEAD CAP SCREW | 4 | ||
| R909156649 | SCREW PLUGD | 1 | ||
| R909156651 | SCREW PLUGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | Standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 28 | 28 |
| Series | Series 3, index 1 | 31 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Sealing material and ATEX version | FKM (fluoroelastomer) and ATEX version II 3G Ex h IIC T4-T1 Gc X | A |
| Drive shafts | Splined shaft Standard shaft ANSI B92.1a | S |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports, laterally opposite fastening thread, metric | 12 |
| Through drives | without through drive | N00 |